A glass rotor flowmeter is a device used to measure fluid flow rate.
1. Simple structure: The glass rotor flowmeter is mainly composed of a glass tube and a rotor (float). A ruler is engraved on the glass tube for reading the flow rate; The rotor can move up and down according to the flow velocity of the fluid. This design makes the flowmeter easy to install and maintain.
2. High accuracy: The working principle of the flowmeter is to measure the flow rate based on the speed (or position) of the rotor rotation. When fluid flows through the rotor, torque is generated, which drives the rotor to rotate (or rise). The speed of rotor rotation is proportional to (or the height of rise is proportional to) the flow rate of the fluid, thus achieving accurate flow measurement.
3. Good visibility: Due to the use of transparent glass tubes, operators can directly observe the flow of the measured fluid and the position of the rotor, thus clearly understanding the flow rate and status of the fluid. This visibility helps operators to monitor and adjust in real-time.
4. Strong corrosion resistance: The glass tube of the glass rotor flowmeter often uses materials with strong corrosion resistance, such as borosilicate glass, which enables the flowmeter to be used in various liquids and gases and has good corrosion resistance, making it less susceptible to fluid erosion and damage.
5. Diversified interfaces: Flow meters have various interface forms, such as flange connections, threaded connections, etc., which can meet the installation requirements of different process pipelines. This diversity of interfaces makes flow meters more flexible and adjustable in practical applications.
6. Easy to clean and maintain: Due to its simple structure, the flowmeter is easy to disassemble and clean. The operator can disassemble the glass tube and rotor, clean them thoroughly, and perform maintenance and upkeep. This enables the flowmeter to maintain good performance and accuracy during use.
7. Adjustable range: The range of the flowmeter can be adjusted by replacing rotors of different specifications or adjusting the scale. This adjustability enables the flowmeter to adapt to the requirements of different flow ranges, providing a wider range of application areas.
8. Low pressure loss: The unique design ensures that the pressure inside the equipment can be fully utilized, with low loss, easy use, and stable performance.
9. Wide measurement range: The ratio of the flowmeter can reach 25:1, suitable for small pipe diameters and low flow rates. Generally, the diameter is below 40mm, and can even be as low as 1.5mm, which is very suitable for small diameter and low flow rate conditions. The flow rate can be controlled between 0.2~0.6m/s.
In summary, glass rotor flow meters have the characteristics of simple structure, high accuracy, good visibility, strong corrosion resistance, diverse interfaces, easy cleaning and maintenance, adjustable range, small pressure loss, and wide measurement range. These characteristics make flow meters widely used in many industries and an important tool for flow measurement.
We specialize in producing electromagnetic flowmeter, vortex street flowmeter, spiral vortex flowmeter, turbine flowmeter, liquid gas mass flow meter, metal tube rotameter, orifice flowlmeter, ultrasonic flowmeter, verabar flowmeter, target type flowmeter, magnetic level indicator, differential pressure transmitter, etc.
